Home > Products > Titanium and Titanium Alloy

Products

Ti6Al4V 3D Printed Materials

Name: Ti6Al4V 3D Printed Materials
Brand: KEHUI
SKU: 236981912

Name:Ti6Al4V 3D Printed Materials
Grade:Ti6Al4V,GR5,GR23
Brand:KEHUI
Standard：ASTM B348,ASTM F136,ASTM,F67，GB/T38973

Send Inquiry

Description

Products Description

Most domestic manufacturers of metal 3D printers, support the printing of titanium alloys. Abroad, titanium alloys are similarly highly valued.

Titanium is one of the most commonly used metals in additive manufacturing, and is widely used in aerospace, joint replacement and surgical tools, racing and bicycle frames, electronics and other high-performance products. Titanium and titanium-based alloys are valued across industries for their high mechanical strength, high strength-to-weight ratio, and better corrosion resistance than stainless steel, and the use of this material can make rockets and airplanes lighter, thereby saving fuel and increasing payload capacity. It can also be used to make lighter weight electronics, such as smartphones and VR goggles, as well as in the field of medical implants. And the advantages of combining the inherent properties of titanium with the unique capabilities of 3D printing are even more pronounced.

Titanium and titanium alloy bars for additive manufactural powder
■Ti 6Al-4V, Grade 5 is the most commonly used titanium alloy in additive manufacturing and is well suited for prototypes and functional components in aerospace and automotive applications as well as military applications. It is also an excellent material for parts with complex geometries and precision, as well as for production tooling.

■ Grade 23 Ti 6Al-4V is a biocompatible alloy commonly used in medical implants and prosthetics.

■GR21 titanium alloy has higher strength than traditional titanium alloys such as Ti-6Al-4V, and Grade 21 titanium has one of the lowest hydrogen absorption efficiencies of all titanium alloys. It is ideal for orthopedic implants and aerospace engine applications. beta titanium is widely used in orthodontics.

■ Due to titanium's biocompatibility with the human body, Cp-Ti (pure titanium) grades 1 and 2 are widely used in medical applications for a wide range of uses.

GB/T 38973 standard requirements for grade, condition and specification of bars

Grade	State	D/mm	L/mm
GR1,GR2,GR6,GR5,GR21,GR23,TA1G,TA2G,TA7,TA7ELI TA15,TA18,TA19,TA28,TC1,TC2,TC4,TC4ELI,TC6,TC11,TC17,TC18,TC20,TC21	Stress Relief Annealed State (M)	30～100	300～1000
	Hot Worked State (R)

Grade	Major elements (mass fraction)/%									Impurity element (mass fraction)/%, not more than
	Ti	Al	Mo	V	Zr	Cr	Mn	Sn	Si	Fe	C	N	H	O	other
															each	total
TA1G	base									0.20	0.08	0.03	0.015	0.16	0.10	0.30
TA 2G	base									0.30	0.08	0.03	0.015	0.15～0.20	0.10	0.30
TA7	base	4.0～6.0						2.0～3.0		0.50	0.08	0.05	0.015	0.18	0.10	0.30
TA7ELI	base	4.50～5.75						2.0～3.0		0.25	0.05	0.035	0.0125	0.10	0.10	0.30
TA15	base	5.5～7.1	0.5～2.0	0.8～2.5	1.5～2.5				≤0.15	0.10	0.08	0.05	0.015	0.12	0.10	0.30
TA18	base	2.0～3.5		1.5～3.0						0.25	0.08	0.05	0.015	0.10	0.10	0.30
TA19	base	5.5～6.5	1.8～2.2		3.6～4.4			1.8～2.2	0.06～0.10	0.10	0.05	0.05	0.0125	0.12	0.10	0.30
TA28	base	2.0～3.0								0.30	0.08	0.05	0.015	0.13	0.10	0.30
TC1	base	1.0～2.5					0.7～2.0			0.30	0.08	0.05	0.012	0.13	0.10	0.30
TC2	base	3.5～5.0					0.8～2.0			0.30	0.08	0.05	0.012	0.13	0.10	0.30
TC4	base	5.50～6.75		3.5～4.5						0.25	0.08	0.05	0.015	0.10	0.10	0.30
TC4ELI	base	5.5～6.5		3.5～4.5						0.15～025	0.08	0.03	0.012	0.08	0.10	0.30
TC6	base	5.5～7.0	2.0～3.0			0.8～2.3		Fe:0.2～0.7	0.15～0.40		0.08	0.05	0.015	0.16	0.10	0.30
TC11	base	5.8～7.0	2.8～3.8		0.8～2.0				0.20～0.35	0.25	0.08	0.05	0.012	0.12	0.10	0.30
TC17	base	45～5.5	3.5～4.5		1.5～2.5	3.5～4.5		1.5～2.5		0.25	0.05	0.05	0.0125	0.07～0.11	0.10	0.30
TC18	base	4.4～5.7	4.0～5.5	4.0～5.5	≤0.30	0.5～1.5		Fe:0.5～1.5	≤0.15		0.08	0.05	0.015	0.16	0.10	0.30
TC20	base	5.5～6.5						Ta:≤0.5	Nb:6.5～7.5	0.25	0.08	0.05	0.009	0.16	0.10	0.30
TC21	base	5.2～6.8	2.2～3.3	-	1.6～2.5	0.9～2.0		1.6～2.5	Nb:1.7～2.3	0.15	0.08	0.05	0.015	0.13	0.10	0.30
Other elements generally include Al, V, Sn, Mo, Cr, Mn, Zr, Ni, Cu, Si, Y, of which the Y mass fraction should not be greater than 0.005%; products can be shipped from the supplier does not test the other elements, the demand side requirements and specified in the order (or contract) can be sampling.