Titanium Alloy Plate Titanium Product

 

Titanium plate, is made of titanium as raw material for the metal plate, titanium is a very special metal, very light texture, but very tough and corrosion-resistant, it will not be like silver will turn black, at room temperature for life to maintain its own color tone. The melting point of titanium is similar to that of platinum, and it is widely used in metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace and other industries.

Implementation standards

There are two kinds of titanium plate executive standards:

The national standard is GB/T3621-2007, GB/T13810-2007

American Standard is ASTM B265, ASTM F136, ASTM F67, AMS4928.

 

Titanium plate grade

American Standard: GR1, GR2, GR3, GR5, GR7, GR12

Russian standard grade: BT1-00, BT1-0, BT1-2, etc.

Domestic grades: TA0, TA1, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4

 

Manufacturing process for titanium plates

Hot forging: a forging process carried out above the recrystallization temperature of the metal.

Hot rolling: rolling process carried out above the recrystallization temperature.

Cold rolling: plastic deformation temperature below the recovery temperature of the rolling process.

Annealing: the metal is slowly heated to a certain temperature, maintained for a sufficient period of time, and then cooled at a suitable rate (usually slow cooling, sometimes controlled cooling) of a metal heat treatment process.

Pickling: immersing a workpiece in an aqueous solution of sulfuric acid, etc., to remove thin films of oxides, etc., from the surface of the metal. It is a pretreatment or intermediate treatment for electroplating, enameling, rolling and other processes.Cold chain transportation of semi-finished food project.

Characteristics of titanium plate

1. Titanium plate is the surface of the oxide film is equivalent to a good wear-resistant hair separator, the use of titanium plate to save the separator, so that the pole plate stripping easy, eliminating the process of pre-treatment of the plate, titanium plate is half as light as the copper seed plate.

2. The service life of titanium plate is more than 3 times than that of copper seed plate, and it can reach 10-20 years according to the operation conditions.

3. Electrolytic copper made from titanium plate has a dense crystalline organization, flat and smooth surface, and excellent quality.

4. Since the titanium plate does not need to be coated with a separator, the pollution of copper electrolyte can be avoided.

5. Increase the production capacity and reduce the production cost of copper electrolytic, so it has better economic benefits.

 

The surface quality of titanium plate

1, the surface of the plate should be smooth and clean, in the original color of the metal. The plate is allowed to be supplied with sandblasted surface;

2, the surface of the plate is allowed to exist a slight darkening and local water stains; allowed to have localized, not more than half of the thickness tolerance of the scratches, indentations, pits and other defects, but should be guaranteed to be smaller thickness;

3, the surface of the plate is not allowed to have cracks, skinning, oxidized skin, pressure folding, metal and non-metallic inclusions and other macro-defects and traces of over-alkali washing;

4, the plate is allowed to clear the local defects along the rolling direction, but the thickness of the plate after removal shall not be less than Z small allowable thickness;

5,When there are special requirements on the surface quality of the plates, they can be supplied through negotiation between the supply and demand sides.

 

 Tel: 0917-3381220

 Phone: +86 15353021135

 Email: wilson@kehuititanium.com

 Wechat: +86 15353021135

 Address: Gaoya industrial park, High-tech Development Zone, Baoji city, Shaanxi province, China

 

Hot Tags: Titanium Alloy Plate Titanium Product, China Titanium Alloy Plate Titanium Product manufacturers, suppliers, factory, Gr5 Titanium Plate, Top Titanium Round Bar, Titanium Gr2 Round Bars, ASTM B348 Titanium Alloy Bars, Zr705 Zirconium Rod, High Hardness Titanium Block